Heritage Brass Front Door Furniture

Heritage Brass Door Knockers and Door Bells

Explore Heritage Brass door knockers and door bells for a practical and decorative addition to your entrance. The range includes traditional and contemporary designs that allow visitors to announce their arrival while complementing the other fittings on the door.

Door knockers should be positioned where they are comfortable to use without interfering with a letter plate, centre knob, lock or glazing. Before ordering, check the overall dimensions, projection, fixing centres and method of installation.

If you are fitting to a panelled door, make sure the chosen position provides a sufficiently flat and secure fixing surface. The fixings must also be appropriate for the material and thickness of the door.

Door Letter Plates and Tidies

Our door letter plates and tidies provide a coordinated way to receive post through an entrance door. The external letter plate covers the opening, while a matching tidy can be fitted internally to give the aperture a neater finish and help direct incoming mail.

When replacing an existing letter plate, measure the door aperture, fixing centres and overall footprint of the original fitting. The new plate must accommodate the opening and ideally cover any previous holes, marks or unfinished areas.

Check the door thickness and determine whether an internal tidy is included or needs to be purchased separately. Allow sufficient internal clearance for the flap to open freely.

House Numbers and Front Door Numbers

Heritage Brass house numbers can be fitted to front doors, door frames, porches and suitable exterior walls. Clear front door numbers help visitors, deliveries and emergency services identify your property.

Choose numbers that are easy to read from the normal approach to the house. Consider their size, spacing, contrast against the background and final position before drilling any fixing holes.

Lay out multi-digit house numbers together before installation to confirm the alignment and spacing. Check whether each number uses visible, concealed or pin fixings and make sure the mounting surface is suitable.

Heritage Brass Centre Door Knobs

A centre door knob is positioned on the exterior face of an entrance door, where it provides a decorative focal point and a convenient pull. Unlike a turning door knob, it is normally fixed in place and does not operate the latch.

Available designs include round, octagonal, reeded and Art Deco-inspired options. Select a centre knob that is appropriately proportioned for the width and style of the door and coordinates with the knocker, letter plate and other visible fittings.

Check the projection, fixing method, door thickness and internal clearance before installation. Extra care may be required with glazed, panelled or composite doors.

Front Door Security Hardware

Our front door security hardware includes door chains, viewers, restrictors, bolts and related entrance-door fittings. These accessories can be used alongside compatible locks and door furniture as part of a complete front-door arrangement.

A door viewer allows the occupant to check who is outside, while a chain or restrictor can limit the initial opening of a compatible door. Bolts may provide an additional closing point, depending on the door design and product specification.

Security products differ in their intended use and performance. Confirm compatibility with the door construction and follow the manufacturer’s installation guidance. Where an insurance or recognised security standard applies, make sure the complete door and locking arrangement meets the required specification.

Planning a Coordinated Front Door

Begin by deciding which external door fittings are required and how they will be arranged. A typical front door may include:

• A door knocker or door bell
• A letter plate with an internal tidy
• House numbers
• A fixed centre door knob
• Door handles, locks and escutcheons
• A viewer, chain, restrictor or additional security fitting

Mark out the approximate position of each item before drilling. Check that the fittings are visually balanced, comfortable to use and clear of glazing, mouldings, locks and internal components.

Choosing a Front Door Finish

Using products from the same Heritage Brass finish family will help create a consistent appearance across your entrance. Brass, bronze, chrome, nickel and darker finishes can each give a front door a different character, but availability and exterior suitability vary between products.

Exterior hardware is exposed to moisture, pollution, sunlight and regular handling, so its appearance may change over time. Review the care guidance for each product and avoid unsuitable abrasive or chemical cleaners.

Replacing Existing Front Door Furniture

Measure existing hardware before removing it, recording the overall dimensions, aperture size, fixing centres and projection. Replacement fittings should cover any redundant holes or marks while remaining compatible with the door’s construction.

Do not drill until you have checked both sides of the door for locks, glazing, reinforcement and other concealed components. Composite, metal, glazed and fire-rated doors may have specific installation requirements.

To coordinate your entrance-door fittings with matching internal door handles, cabinet hardware and window furniture, browse the complete M-Marcus Heritage Brass collection.